Anti vibration mat for Prusa Mk3/s in Flex

prusaprinters

<p>Big Anti Vibration Mat for the Prusa Mk3 with Sound reducers in the middle. Just print in TPU with 15% Infill Gyroid is perfect. Just make sure to print it slowly on the prusa. 20mm/s max otherwise i Always got a jammed Extruder.<br/> But then it works perfect. My Printer is now with the TPU feet from my other post even at full Speed almost silent.<br/> BTW Reduce the Top and Bottom layers to like 4 or evem less depending on what your Printer can handle to make it softer. And do not worry. that is especially at the end a torture test for your TPU Settings. It took me a couple of tries to make it work on my Printer. but now all of my tpu prints work and look great.<br/> I added a SLic3r TPU Config i use now for all of the prints. This one works almost with no stringing and perfect.</p> <h3>Print instructions</h3><p>Unassociated tags: anti vibration, Lack enclosure, Prusa MK3</p> <h3>Category: 3D Printer Accessories Print Settings</h3> <p><strong>Printer Brand:</strong> MK3</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2DxjZlB">Prusa i3</a></p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.2mm</p> <p><strong>Infill:</strong> 15% Gyroid</p> <p><strong>Filament:</strong> Amason Basics TPU White<br/> <strong>Notes:</strong></p> <p>Max. Print Speed: 20mm/s</p> <p>If you want to add my print settings. i have attached them for Slic3r for the Prusa MK3s. The extruder of the MK3 works a little different. Maybe someone can try it.</p>