anti vibration feet REMIX V4.5(FINAL final)

prusaprinters

<p>&nbsp;</p><p>I noticed I still get some some vibration from my v3 remix, when the heatbed travels back and forth at speed on my desk so I have added another support to counter it.</p><p>I would also recommend using hard rubber pads 10mm x 3mm+ and not soft felt ones as the weight of the machine squashes them too much.</p><p>The feet are now labeled underneath the print.</p><p>I have infilled the feet bottom pad holder so the rubber pads attach better if you don't have 4mm deep ones when you buy some.&nbsp;</p><p>You may want to move the printers original rubber pads slightly underneath the printer (as where the manual tells you where to put them is close to the chassis end plates) to aid the feet sit level and aren't wonky.</p><p>I am removing gcodes until I am happy with how the feet print as i have had some issues but it is more likely a setting issue, then the actual design.</p><p>you will definitely need supports when printing.</p><p>I have rotated the design by 45 degrees so that the print should need less supports but still print well.</p><p>Slight update to RR, as changed so that there are two flat surfaces now due to the pesky ribbon cable getting in the way still.&nbsp;</p><p>the new file is: feet v4.5 RR&nbsp;</p><p>I will leave the other file incase people still want that version: feet v4 RR</p><p>I have updated the all feet stl to include new change&nbsp;</p><p>new: feet v4.5 all&nbsp;</p><p>old: feet v4 All</p>