Anti-spray visor support, multi models.

Anti-spray visor support, multi models.

cults3d

Preamble. Wearing a visor or facial protection is NOT a substitute for wearing a mask, just as a mask is NOT a substitute for barrier gestures. Update of 22/04/2020 Models with elastics passed in version 1.11: 10° branch spacing on exco and excf models to adapt to larger heads and allow more to be placed on a tray during manufacture. This is a complete collection of supports to make a visor anti-spray according to your needs. The assembly requires an A4 pvc sheet of 0.1mm (0.2 preferable) minimum thickness (binding sheet) and drilled with a 4-hole punch (holes spaced 8 cm apart). Models with elastics can be manufactured with a printer with a tray of 17 cm minimum. The fixing is done with the 4 lugs of the visor support, associated with the 2 clamps placed as close as possible to the side lugs in order to prevent the PVC sheet from escaping. Models With or without elastic depending on what you have available and the model chosen. . A particular effort was made thanks to Frédéric concerning the removal of all points that could be traps for microbes (removal of all obtuse angles <1mm) to facilitate disinfection. Indeed, many models have angles that are too closed, preventing the liquid from passing through them. 4 letters identify the models: 1 - Size x or s x :Teen and adult- s: small children (on request ortho) 2 - Type of fixing e :elastic (requires large elastics and loops to be printed for a better hold) p : pinch (branch) not requiring elastic, however, depending on the head it may be necessary to add a hair or office elastic to strengthen the support. 3 - the frontal support model n: normal (occasional or short-term wear) c : comfort : wear for long periods (wider front support) 4 - The top opening o - open: preferred most of the time f: closed for those who work in an environment requiring it There are therefore the following models xpno: 21 grams xpnf: 24.5 grams xpco: 23 grams xpcf: 27 grams xeno: 13 grams xeco: 14 grams xecf: 19.5 grams spco: 26 grams No official approval of these models has been granted and their use remains your responsibility. PLC model specifics : More face wrap than most models. Declination of a model according to need Optimized design for the absence of germ nests Proximity of the sheet clamp to the pin for a perfect hold of the PVC sheet (even in windy conditions) Wearing a mask possible under the visor Glasses can be worn Models with elastic bands compatible with trays only 17 cm wide. In case of commercial use, a small gesture is welcome.

Download Model from cults3d

With this file you will be able to print Anti-spray visor support, multi models. with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Anti-spray visor support, multi models..