ANTENNA TOPPER FLOWER

pinshape

Printed on Zortrax M200, no supports required for a snug fit on fat style antennas. Designed specifically in Solidworks 2018 for precision and accuracy. Estimated print time is approximately two hours and forty minutes to complete the project. Material usage comes out to be around six point fifty-eight meters or sixteen grams of ABS-based filament. The printer used for this design is Zortrax M200, a reliable device known for its high-quality prints. Layer height is set at 0.14 mm, providing sufficient detail and texture to the finished product. Infill percentage stands at ten percent, adding strength and stability without compromising on weight or material usage. Fan speed is automatically adjusted based on the print job requirements for optimal results. Seam setting is normal, allowing for a smooth finish with no visible imperfections. Holes are precision-drilled at 0.19 mm in diameter for secure connections. Surface layers consist of seven top and six bottom layers, providing ample room for design elements and details. Smart bridges are enabled to ensure that the print adheres to the specified dimensions and tolerances. Top layer infill is set at one hundred percent, ensuring maximum structural integrity and stability. Bottom layer infill percentage also stands at one hundred percent, providing additional support and reinforcement. Extrusion temperature is carefully calibrated at 265 degrees Celsius for optimal melting and bonding of the filament. Platform temperature is maintained at a comfortable eighty degrees Celsius to prevent warping or deformation during the print process. Retraction speed is set at thirty millimeters per second to prevent oozing and stringing. Retraction distance is adjusted to 0.5 mm, allowing for precise control over the extrusion process. First layer gap is carefully set at 0.23 mm to ensure proper adhesion between the platform and the printed object.