Antenna guard protection cover for FPV camera Eachine TX01 TX02 TX03 installed in JJRC H8 Mini or Floureon H101 mini drones

thingiverse

This remix is based on the design "Whoop Camera Mount for Eachine TX01" available at http://www.thingiverse.com/thing:1815820, created by "sepela" on October 9, 2016. I've made two versions of the antenna guard with reduced thickness - one with a thickness of 1.6 mm and another with 1.2 mm. Reducing thickness was essential to fit this guard over the upper body shell of two mini drones, Eachine/JJRC H8 Mini and Floureon H101. This modification is intended to protect the antenna of my installed Eachine TX01 camera for first-person view (FPV) flying. The original guard design by "sepela" has a thickness of 2.41 mm, which I've included in this bundle for convenience. These guards will fit perfectly with other similar mini cameras or drones when you need to insert them over the upper body shells without using base mounts for the camera. I've attached two pictures showing my modded mini drones where you can see the final result of inserting these new antenna guards. For the Eachine H8 Mini (white) and Floureon H101 (red), I chose the 1.6 mm version as it's more robust. The terminals of the guard were approached to fit within the upper body shell borders. When doing this kind of modding, I recommend using hot-melt adhesive for a secure fix. Be cautious about where you insert the guards to avoid them being touched by the drone blades. The available files for download are: 1.2mm_antenna_guard_protection_fpv_aio_camera_mini_drone_sxs.stl 1.6mm_antenna_guard_protection_fpv_aio_camera_mini_drone_sxs.stl 2.4mm_antenna_guard_protection_fpv_aio_camera_mini_drone_original_sepela_sxs.stl Print Settings: Printer Brand: RepRap Printer: P3 Steel MM Large Rafts: No Supports: No Resolution: Nozzle 0.4 mm - Layer height 0.2 mm - Shell thickness 1.6 mm Infill: 25 Notes: The piece was printed with PLA 1.75 filament using Cura slicer software and a 0.4 mm nozzle.