Antec ISK 110 top lid mod

prusaprinters

<p>Hello.</p><p>Needed a tallest top lid to allow better clearance for large heatsink, (scythe shuriken), the case has firm mounting, spend some time making test to achieve a good fitment. (You can see in the attached photos).</p><p>Print with 0.20 layer height, and add supports only on the small tabs. This was made to fit inside a prusa mk3s printer, if you has a printer that can fit in one piece, you are ready to go, if you need to fit on a prusa (one side has more 21cm of width....) you need to cut in two pieces.</p><p>Put the top lid straight and cut exactly on 209mm, you notice that I put nut traps and holes, you will need 3x m3x15 bolts with nuts, and 2x m3x12 bolts with nuts. See attached images for more information.</p><p>Use seam blocker to prevent seams on the faces that will be joined, I put two squares on one side if you want to put some glue, not needed (I actually don't use the glue).<br><br>Added a 3mf file with all of this done.</p><p>Printed with a prusa mk3s+, but some of the tests made with Artillery X1 with 0.6mm nozzle and 0.4mm layer height (the yellow pieces).</p>