Anova sous vide circulator to coolerbox adapter

prusaprinters

<p>A support for Anova Culinary's immersion circulator to mount it to a Curver 10 liter cooler box. May fit other storage- or cooler boxes.</p> <p>There are two versions. One can be used as a separate support to adjust the height of Anova relative to the water surface. It may be glued to the box cover if wanted.</p> <p>The second version consists of 3 parts. One goes below the cover, one in the middle and one on top of the cover, and it can be attached using bolts and nuts.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Ultimaker</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ultimaker 2</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>25%</p></div> <p><strong>Notes:</strong></p> <p>I printed using black Ultimaker PLA.</p> <h3>Post-Printing</h3> <p>For the first version, I drilled a 62mm hole to the cover of the cooler box. Anova shaft is 60mm, but the 62mm hole saw was the closest in size that I had. Then I glued the riser part on it with cyanoacrylate glue.</p> <p>For the other version, I also drilled a 62mm hole (and four 5mm mounting holes) and bolted it on the cover of the cooler box.</p> <p>So far have done three of these for family and friends who have Anova circulators and I haven't encountered any issues.</p> </p></p></p> Category: Kitchen & Dining