ANN-MB-00-00, U-Blox GNSS Multi-Band Magnetic Mount Antenna - 5m (SMA)

grabcad

ANN-MB-00-00, U-Blox GNSS Multi-Band Magnetic Mount Antenna - 5m (SMA)I am getting a great GPS signal indoors with this coupled to a SparkFun GNSS Receiver Breakout - MAX-M10S (Qwiic).I'm using the MAX-M10 Series for maximizing power savings versus previous generation U-Blox GPS modules and various other GPS modules.https://www.sparkfun.com/products/18037https://www.u-blox.com/en/product/max-m10-series"The ANN-MB-00 GNSS multiband antenna is extremely unique from other GNSS/GPS antennas in that it is designed to receive both the classic L1 GPS band and the newly launched (started in 2005) L2 GPS band. Additionally, the ANN-MB-00 from u-blox is extremely well built with both a magnetic base with mounting holes for additional anchoring for the harshest environments.Designed for the latest u-blox F9 platform--including the ZED-F9P module--it provides a fast, easy, and reliable multi-band antenna solution but can be used with any GPS/GNSS receiver that can benefit from the L1/L2 dual reception.This antenna supports GPS, GLONASS, Galileo, and BeiDou and includes a high-performance multi-band RHCP dual-feed patch antenna element, a built-in high-gain LNA with SAW pre-filtering, and a 5m SMA cable."Frequency: -L1 Band: 1559-1606MHz -L2/L5 Band: 1197-1249MHzPeak gain (over 15cm diameter ground plane): -L1 Band: 3.5dBic -L2/L5 Band: 0-2.0dBicVSWR: max. 2Bandwidth: min. 200MHzImpedance: 50 OhmPolarization RHCPSupports GPS, GLONASS, Galileo, and BeiDou5m coaxial cable with SMA connectorMagnetic base, fixed installation option (screw mount, 2 x M4 screws)Dimensions: 60.0mm x 82.0mm x 22.5mmWeight: 175g (including cable)"The steel disc provides a ground plane for a low cost u-blox ANN-MB-00 antenna and enables centimeter-level positioning when coupled with a L1/L2 capable GNSS receiver such as the ZED-F9P."GPS-17519, GPS Antenna Ground PlateGPS-17519, GPS Antenna Ground Platehttps://www.sparkfun.com/products/17519SparkFun GPS-RTK-SMA Breakout - ZED-F9P (Qwiic)https://www.sparkfun.com/products/16481Note:For the SMA connector thread my preferred choice is to use metric threads only so I modeled it with an M6 thread in mind versus an Imperial units thread.