Ankly Robot - 3d Printed Assembled

pinshape

Articulated Robot Design: Ankly \n\n Ankly is printed articulated, with no need for subsequent assembly. A challenge for your printer, you must adjust it well to be able to print it since the tolerances for the joints are minimal. Once printed, it's necessary to review and remove the small supports from the piece. http://www.youtube.com/watch?v=dkAjQNrZWSM \n\n You will find two files, one at 100% size and another at 80%. (100% size is easier to get good results) \n\n Author: http://www.soniaverdu.es/ \n\n Print Settings \n\n Rafts: No Supports:No Resolution: 0.2mm (size:100%)  0.16mm(size 80%) \n\n Infill: 20% (for 100% size)  40% (for 80% size) \n\n Notes: To print at 80% of its size, I recommend choosing the file "80 little puppet Ankly.stl" Layer Height: 0.16mm Wall thickness: 1.2mm Infill density: 40% Wall speed: 35mm/s Infill speed: 60mm/s