Ankly Robot - 3d Printed Assembled

prusaprinters

<p>Articulated Robot design. His name es Ankly<br/> It is printed articulated, without need of later assembly.<br/> A challenge for your printer, you must adjust it well to be able to print it since the tolerances for the joints are minimal.<br/> Once printed it is necessary to review and remove the small supports of the piece.<br/> <figure class="media"> <oembed url="http://www.youtube.com/watch?v=dkAjQNrZWSM"></oembed> </figure> </p> <p>You will find two files one at 100% in size and another at 80%.<br/> ( 100% size it is easier to get good results)</p> <p>On request I added file without supports (100 size Ankly without supports.stl). With this file it is necessary to add supports to be printed.</p> <p>Author: <a href="http://www.soniaverdu.es/">http://www.soniaverdu.es/</a></p> <h3>Print instructions</h3><h3>Category: Model Robots Print Settings</h3> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.2</p> <p><strong>Infill:</strong> 20% to 100% size</p> <p><strong>Notes:</strong></p> <p>To print at 80% of its size, I recommend choosing file "80 little puppet Ankly.stl"<br/> Layer Height: 0.16mm<br/> Wall thickness: 1.2mm<br/> Infill density: 40%<br/> Wall speed: 35mm/s<br/> Infill speed: 60mm/s</p> <p>Laminate with Cure</p> <h3> Post-Printing</h3> <p><strong>Puppet Robot</strong></p> <p>As the joints have little friction, it is possible to construct a puppet.<br/> If on the other hand you want to add friction, you can put liquid latex on the joints.</p>