AnkerMake M5 - Storage Boxes

prusaprinters

Suggested printer settings:0.4 nozzlelayer height: 0.2top/bottom layers: 3infill: at least 10%supports: set to ‘Everywhere’ for boxes, at least 12% densitySuggested filament and colour:PLA+‘Grey’ for the boxes‘Black’ for the lidsSuggested print orientation:Boxes should be printed flat with support.Lids can be printed with the top facing down (if you want the texture of the bed plate to appear atop the lid).Additional items required:1.5-2mm thick rod to act as the hinge for the lid (you could also use a small nail)double-sided tape of max 0.8mm thicknessTest Install:Please ensure your printer is on a level surface and you have completed an auto-levelling successfully before installing these storage boxes. Please also ensure to do a test fit without the double-sided tape and test moving the bed manually to confirm there are not any clearance issues (there should be 2-3mm of clearance depending on the tape used).v20231104Lid stoppers have been adjusted to allow slight tilt, so the lid does not auto close. My models are available for free download and personal use.If you wish to send me any friendly contributions then you can at: https://paypal.me/HarpreetSingh837