Anker Wireless Charging Station Aligner
prusaprinters
Anyone else wake up with your phone at 8% because your phone was 0.001mm off from the sweet spot of your wireless charger? This slide-on add-on for the Anker Charging Station device is intended to give you a way to add (glue on) aligner pegs to match the width of your phone so that you don't have to spend your evening locating that charging sweet spot before dozing off. I have my Mini's project loaded, along with the STL for the aligner by itself. I used the Prusa Slic3r's internal “cylinder” as the pegs, scaled to 25%. The pegs are glued on based upon the width of your device. I printed in PETG, and it works even with a thick Otterbox case on my iPhone. Works with my "Anker Wireless Charging Station 2 in 1” (2020 model).
With this file you will be able to print Anker Wireless Charging Station Aligner with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Anker Wireless Charging Station Aligner.