Anker Wireless Charging Dock

prusaprinters

<p>Redesigned the dock so that my phone would sit lower by 10mm and charge. With the original version, the phone wouldn't charge since it was too high up on the pad.</p> <p>I also "trimmed" the top to reduce filament usage, with my slicer settings, it went down by about 15g and eliminated the need for supports.</p> <p>The dock width is for larger phones, like in the original design. I'm using this with a iPhone 7 Plus that has a mophie battery case which allows for wireless charging.</p> <p>I made some minor changes in V2. Increased the clearance for the connector to the charging pad and added a feature to hold the cable in place under the dock.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Ultimaker</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ultimaker 2</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.15</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20</p></div> <p><strong>Filament:</strong> Ultimaker PLA Orange</p> </p></p></p> Category: Mobile Phone