Anker 735 Side Mount

thingiverse

<b> Summary </b> Fits snuggly around the Anker 735 charging block and holds it against a mounting surface (like the side of a wooden desk). It grips the Anker 735 snuggly enough that you can single handedly insert/remove your cables without it sliding out of the bracket. <b> Print Settings </b> Use 20% infill with supports only under the floating screw nub. Supports shouldn't be necessary inside the screw holes. Takes about 2hrs, 10min with normal Cura settings. <b> Post Process </b> I recommend drilling out the two mounting holes with an 11/64" drill bit and secure into place with two #6 wood screws. I used 5/8" long screws. Pre-drill into wood using 7/64". The screw holes are 54mm apart (center-to-center).