Anisoptera Racer

thingiverse

The Anisoptera Racer is a Nano-sized FPV racer with a Micro Scisky board, 1 & 2s Batteries, designed to be simply 3D Printed. Designed for the Drone race of the Toulouse Fablab festival. Parts List for a nano FPV racer set-up: Propeller/Helices -> Banggood: JJRC 1000 Props Motors/Moteurs -> Banggood: Hubsan H107C Motors or Amazon: Hubsan H107C Motors Control/Controleur -> Banggood: Micro Scisky control board or HobbyKing: Quantum pico control board Batteries -> HobbyKing: 260mAh 35c 1s batt or For the brave 2s seems to work but maybe not for long / Pour les plus téméraire il est possible de l'utiliser aver des batteries 2s mais la durée de vie des motors est alors trés limité -> HobbyKing: 2S Batt Cam -> Banggood: CMOS 170Deg Cam OSD (optional) / Optionnel -> Banggood: Micro MinimOSD AV-Transmit/Emmeteur Video -> preferably/preferablement Banggood: 25mW transmitter or Banggood: 200mW transmitter And finally a 33nf capacitor to be connected on the video power to filter the interference from the engine. Configuration: Install Betaflight on the controller: https://github.com/borisbstyle/betaflight/releases/ Version Notes: V0.9 -> Flat bottom to reduce need for support V0.8 -> V0.7 became very hard to destroy, but I finally managed to do it for here is V0.8 with some strength improvements. V0.7 -> Arm base reinforcements again, Engine end stop reinforcements, transversal bar adaptation V0.6 -> Arm base reinforcements & First FPV videos V0.51 -> Update to resolve printing issues, James Dean version Very intense life but short holding of motors, size reduced, battery space adapted to hold 1s 750mha V0.5 -> Fuselage resize for 2S 300mah Turningy Bat V0.4 -> 9.8g -> fuselage resize, arm attachments resize V0.3 -> 9g -> Motor wire passage adapted Again, Arm reinforcement reduced, Better V0.2 -> 11.7g -> Motor wire passage adapted, battery space adapted, arms reinforced. V0.1 -> 10.0g -> Initial model Made in Fablab Artilect: https://artilect.fr/dronelab/ https://youtu.be/RcJcHMlQvyw https://youtu.be/PNofi0aoptI https://youtu.be/dBOKuYc3jXQ https://youtu.be/Y-fJJdXfXks Print Settings: Printer Brand: Up! Printer: Up Plus Rafts: Yes Supports: Yes Resolution: 0.25mm Infill: 20% Notes: 3 layers Support < 10Deg