Angled Ear Saver Stack

prusaprinters

<p>This is an 8 stack of a modified ear saver. A slight bevel cut has been added in the center so that a paint scraper can be pushed in to help make separation easier. The use of gloves is recommended when separating the stack.</p> <p>Versions:<br/> -Single modified ear saver for stacking<br/> -Stack for mk3s, 0.3mm layer height</p> <p>A stack takes about 2 hours. 6 stacks fills a build plate and takes about 12 hours.</p> <p>I tend to print stacks with very slow print speeds (30mm/s for all print moves) and 10% infill using PLA. This print went okay with normal print speeds but the backs were a bit messier. No supports. Sliced using PrusaSlic3r 2.0.0 (an older version) with no issues. Newer versions may have some problems.</p> <p>If you have an original source for the modified file, please let me know so I can link it. I had this stl shared with me.</p> <h3>Print instructions</h3><p>-I print with PLA.<br/> -Layer height 0.3<br/> -Make sure the version that you use matches the layer height you slice with so that there are the appropriate gaps to allow it to break apart.<br/> -Slow print speeds, I generally use 30mm/s or slower for all print moves in a stacked print but this one does okay with normal print speeds if you are fine with a messier back<br/> -No supports<br/> -Sliced using PrusaSlic3r 2.0.0 (an older version) with no issues. Newer versions may have some problems.</p>