Angled Dry Box Feeder with Source

thingiverse

Inspired by the <a href="https://www.thingiverse.com/thing:878919">design of sarman_1998</a> I created my own version which can be used in combination with PC4-M6 (and PC4-M10, see below) fitting PTFE tubing (6mm thread), and 2 M3 bolts + hexagon nuts. The code can be changed to choose your own degree (or place a comment, and I will add a stl) Items I used: bolts: M3x10 DIN 7985 (cross) -> as long as it is flat at the side of the thread washers: DIN9021 3,2mm washer (optional) nuts: M3 DIN 985 (nylon locking nut) -> outside measures: 5.5 mm (parallel sides of hex), height 4.0 mm (2.4mm hexagon) I decided to place the center of the holes at a fixed distance of 15mm from the tube-hole (so 30mm between both holes) to make it easy possible to replace them - if I need to do - for another design as long I keep using the same distance. Thanks to <a href="https://www.thingiverse.com/motocoder/about">motocoder</a> also a template to drill the holes is included. 2018-09-03: Added a PCx-M10 outside for 10mm connectors, on request of <a href="https://www.thingiverse.com/bratej/about">bratej</a> 2018-11-11: v1.1: Improved calculations for the position of the thread, relevant for an angle between 40° and 60°. Thanks to <a href="https://www.thingiverse.com/arnaudth/about">Arnaud</a>.