ANET A8 Z Axis Rod Cap (for 10mm Acrylc hole inner diameter)
thingiverse
This design is specifically tailored for the ANET A8 Z Axis Rod Cap, ensuring maximum stability and minimizing shaking during print operations. Print Settings: Rafts: Ignore this setting as it holds no significance. Supports: The same principle applies; feel free to disregard this option altogether. Resolution: Opt for a precise 0.1 resolution for the best results. Infill: Set the infill to a generous 100% for optimal print quality. Notes: When using this cap, consider PLA or ABS plastic; it doesn't matter which one you choose. However, don't forget to apply grease oil inside the cap for smooth operation. Leave approximately 1mm of clearance for easy insertion into the rod's hole. If your printer requires a tape on the cap surface due to its Z Axis Rod Hole, feel free to use it as needed.
With this file you will be able to print ANET A8 Z Axis Rod Cap (for 10mm Acrylc hole inner diameter) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on ANET A8 Z Axis Rod Cap (for 10mm Acrylc hole inner diameter).