Anet A8 X-axis R1

thingiverse

04.04.17 Developing a new X-axis holder 05.04.17 Removed video description https://youtu.be/JCQU51jBgts 06.04.17 Tested the improved model, everything is fine and assembly can begin) Assembly Order: Insert four M3 screws from the inside for rod tightening as shown in the last photo and screw them in with M3*12, but do not overtighten Insert two M3 screws from the inside for Z-axis nut insertion, insert the Z-axis nut and secure it with M3*20. Tighten securely Insert X-axis rods and Z-axis rod. Shift the X-axis rods so that the Z-axis rod can enter the printer body hole without bending (a small note: my X-axis rods are firmly attached to the motor side, I wrapped them with stretch film and inserted them) Tighten the X-axis rod tightening screws tightly Insert an M4*40 screw into the tensioner. Insert the bearing with a rim and a screw with an M3 nut and secure it. Tighten securely Insert the tensioner into the holder, on the back side, use the handle with the inserted M4 nut to tighten the belts, making sure the Z-axis rod does not bend Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: 0.15 Infill: 50%