Anet A8 - Rear Back Frame Splitted (Telaio Posteriore)

thingiverse

Here is a revised version of the text: Hi, this is the rear frame for Anet A8 for those who have broken the original one. It's too long to be printed in one piece, so I've split it into two parts with a male/female junction. I designed it 2mm thicker to make it strong - if you like, you can scale Z direction inside your favorite slicer to match the original (8mm). I also closed the two holes where the plate rails are fitted. Additionally, I added an extra triangle shape to both X sides for better support with the rest of the frame. Ciao, per quelli che come me hanno rotto la parte posteriore del telaio. La parte è troppo lunga per essere stampata intera, quindi l'ho divisa in due parti ricollegabili con un giunto maschio/femmina. Per rendere la parte più resistente ho aumentato lo spessore di 2mm rispetto all'originale. Chi vuole può variare lo spessore modificando la scala per l'asse Z direttamente nel software di slice preferito. Ho anche chiuso i due fori passanti in cui sono alloggiate le barre di scorrimento del carrello, in modo da non dover più utilizzare i due 'sportellini' originali. Inoltre ho aggiunto due rinforzi ai lati, in corrispondenza dell'unione tra il pezzo e le parti verticali del telaio. I replaced the Italian text with the following: Hello to those who, like me, have broken the rear frame of the Anet A8. The part is too long to be printed as a single piece, so I've split it into two parts that can be connected with a male/female joint. To make the part more resistant, I increased its thickness by 2mm compared to the original. If you want, you can modify the Z-axis scale in your preferred slicer software to match the original 8mm. I also closed the two holes where the plate rails are mounted, so you won't need to use the original "tabs" anymore. Furthermore, I added two reinforcements on the sides, near the connection between the part and the vertical parts of the frame.