Anet A8 Raspberry Pi Cam Holder

thingiverse

I modified the screwless Raspi Cam Mount by DanielBull to be mountable on the Anet A8 with just one screw. I also made changes to the cam case that fits the M12 Raspi Cam hack. Additionally, I updated the back cover because the original design was scraping off some SMD parts of the cam. I only tested this design for the original Rev1.3 Raspberry Pi Cam and you should check the dimensions before printing if you want to use it with another cam module. You need these parts for vanilla Raspberry Camera: camera_holder_bracket_for_anet_a8.stl, camera_mount_front_by_DanielBull.stl, camera_mount_back_more_space.stl, and camera_mount_hinge_by_DanielBull.stl. You will also need these parts for Raspberry Camera with M12 hack: camera_holder_bracket_for_anet_a8.stl, camera_mount_front_m12.stl, camera_mount_back_more_space.stl, and camera_mount_hinge_by_DanielBull.stl. The holder can be mounted on either of the 2 outer holes on the back of the printer. Top left hole is for the Anet A8 Board (picture) with a M3 screw that should be 4mm longer. Left hole of bottom left hole of the Anet A8 board requires a M3x16+mm screw, a washer and an M3 nut. Same thing on the opposite side where the power supply is mounted. You can also use this screwless mount for the Anet A8 by OlliMakes instead of camera_holder_bracket_for_anet_a8.stl: https://www.thingiverse.com/thing:2474665. Depending on how far away your Raspberry Pi is from the camera, you may need a longer ribbon cable: https://goo.gl/8y9xqR. For M12 hack, I used lens + lens mount + lens cover from this Arduino module: https://goo.gl/hfU63k. If you want to support me, just use these links if you want to buy something. This helps me doing more things. Thanks! Banggood: https://goo.gl/ZXgx3A Gearbest: https://goo.gl/FfE59f Aliexpress: https://goo.gl/bQLi15. Print Settings: Printer: Anet A8 Rafts: No Supports: Yes Resolution: 0.24 Infill: 20% Website: https://mightynozzle.com