Anet A8 Mainboard Case with MOSFET and relay plus Rpi mount

thingiverse

VERSION 6 is on the horizon! However, I've hit a snag with printing it yet. Fingers crossed I was able to iron out all the kinks from version 5. I envisioned placing the main board in its original position while encasing it alongside my MOSFET, relay, and Raspberry Pi 2 running Octopi. By combining numerous ideas and designs into one with some personal tweaks, I managed to fit everything except a raspberrypi – I'm creating a snap-on attachment for the top as we speak! I've also added hinges for the lid. Updated 3/1/2019 I revisited the Dual MOSFET Lid. Update 2/18/2018 Uploaded all 3mf files. I figured someone with more expertise could refine these files. The ones labeled 'cut' are the finished version before converting them to stl; the rest are working files Update 8/5/2017 Uploaded Dual MOSFET lid updated Original Lid (fixed some vertices and polygons issues) Update 7/4/2017 removed sliver in case stl Update 5/8/2017 Added a dual MOSFET case; requested by chrisj93 Update 2/25/2017 I've added the Rpi body attachment along with its internal mounting platforms. It works seamlessly with a rpi case (http://r.ebay.com/VN9Ac7) as well The best thing to get for the usb connection is:http://www.ebay.com/sch/sis.html?_nkw=USB+2.0+Type+A+male+plug+to+USB+2.0+Type+B+Male+plug+Printer+Adapter+Converter+&_id=251927240000&&_trksid=p2057872.m2749.l2658 (make sure the USB A terminal ends are facing up while side B angle is facing up) Version 7 (in the future) -any fixes need for version 6 -Rpi Camera mount on bed Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: .2 Infill: 20 Notes: You must turn off/disable skirt (Brim) in Cura to print this. Be sure to lay it down to print as well Post-Printing Ready? I haven't been able to print the v6 myself yet. I'll do so once I get my extruder parts in. If you decide to print this (est 11hrs), please let me know what areas need improvement. Custom Section Version 6