ANET A8 E3Dv6 mgn12 x-carriage [Bowden]

thingiverse

This is a Design to Utilize a MGN12 Linear Rail for the Anet A8. Things You'll Need: * 400mm MGN12 linear rail * e3dv6 clone with a length of 63mm * 4 M3x8 screws to mount the printed part at the sled * 2 M3x30 screws to mount the hotend * 2 M3x25 screws as a belt holder * 1 M3x20 screw to secure the rail at the right x-carriage * 2 M3x30 or M3x40 screws for the belt tensioner * 11 M3 nuts * Washers for the x-carriage The standard x-carriage mount is replaced by this new one. To begin, you'll need to print all parts and then drill a 3mm hole in the right x-carriage to mount the rail. Next, use the M3x8 screws to secure the hotend-holder and then two M3x30 screws to fix the hotend in place. You will also require a bowden extruder mount and a fan duct. The extruder mount can be found at https://www.thingiverse.com/thing:2146021, while the fan duct is available at https://www.thingiverse.com/thing:839620. If you have any questions or need assistance with one of the parts not working properly, feel free to comment below. If you find this design helpful, be sure to leave a like!