Anet A8 Blower Fan Duct (velocity stack)

thingiverse

### Anet A8 Blower Fan Duct (velocity stack) #### Summary An intake duct for the blower fan on the Anet A8, which doesn't really serve a purpose other than making your printer look cool. It aligns perfectly with the intake of the blower. The duct fits on the generic blower fan that's used on the Anet A8, so if your printer (or other device) uses one of those fans, you can make this easily. Printing these is best done with their base on the printbed, 180 degrees rotated from how they appear in Thingiview. #### Versions | | | |-|-| | _v1.stl_ | The original version as shown in images | | _v2.stl_ | Version with taller mounting posts and a more solid base | | _v2_no_center_cone.stl_ | V2 without the center cone | | _v2_high_mounts.stl_ | V2 but with even taller mounting posts | #### Print settings | | | |-|-| | Layer height | 0.16mm | | Initial layer height | 0.16mm | | Line width | 0.4mm | | Wall line width | 0.4mm | | Wall thickness | 0.8mm | | Top/bottom thickness | 0.64mm | | Infill density | 30-60% | | Print speed | 60mm/s | | Top / bottom speed | 30mm/s | | Travel speed | 60mm/s | | Initial layer print speed | 30mm/s | | Initial layer travel speed | 30mm/s | | Fan speed | 25% | | Supports | none