Anet A8 & AM8 X Carriage

thingiverse

I pieced together several components from various sources and added my own touches to create this. It's not elegant, but it functions. My goal was to make this as compact and lightweight as possible while still using the same machine with the same specs. Features: * Gain an extra 10mm of build height! * Direct airflow from the 5015 fan duct onto the filament path * Compatible with the 30mm fan that comes standard with the E3D V6 * Allows for a full view of the nozzle (least obstructed) * Designed to use the 5015 blower from TH3D (see notes below) * Keeps hotend and EZABL probe mounts separate to prevent interference or damage * Uses original slider mounts You may need to purchase additional hardware. I haven't installed it yet, but I know I'll need a few extra bolts. I specifically designed the 5015 fan duct to work with the one sold by TH3D. It's the only company I buy from, and it just so happens that I also work there. www.th3dstudio.com Install the E3D hotend as you normally would. Then adjust the EZABL probe to the correct height above the nozzle. Here's a shameless plug for TH3D: E3D V6 Hotend by TH3D: https://www.th3dstudio.com/product/tough-v6-hotend/ EZABL Kit: https://www.th3dstudio.com/product-category/general-upgrades/auto-bed-leveling/ 5015 blower used here: https://www.th3dstudio.com/product-category/general-upgrades/fans/ Tell Tim (the owner) that Noah sent you! ============================================================ If you enjoy my designs, consider tipping. I put a lot of effort into this, and any support is always appreciated!