Anet A8/AM8 2020 X-Axis 2020 for E3D V6/Titan Aero

thingiverse

I made these parts for the 2020 X-Axis mod. Check out my design AM8 Z-Axis V-Guide at https://www.thingiverse.com/thing:2596722. Currently, I'm using a 16-tooth stepper pulley to achieve better print quality. To prevent belt rub on extrusion, an X-Axis belt spreader is required at the end of extrusion. I updated the design on Oct 29, 2017, adding sensor mount for SN04 and left and right single and double extrusion mounts for anti-backlash nut. On Oct 16, 2017, I added three parts to mount a 50mm axial fan and a 40mm radial fan. July 28, 2017, I added a mount for the E3D Aero. Since I don't have an Aero, I'm unsure how well it works. Some of the parts for the E3D Titan Aero were taken from GaryK47's design. On July 31, 2017, I added a Z-Axis limit switch mount for those not using auto level. Double 40mm fan duct and 12mm BL Touch sensor mounts were also added. The sensor is placed 31.6 or just 32mm to the right of the nozzle. I updated the design on Aug 10, 2017, adding X Axis Tension Mount-V3 for easier assembly. On Sept 15, 2017, I provided steps/mm for a 30-tooth pulley: For 1/16th stepping, use 53.33 steps/mm. For 1/32nd stepping, use 106.67 steps/mm. Here's an example using M92 g-code to set steps per mm in real time. For X axis, the command would be: M92 X53.33. Use M500 to save the setting. The following parts were used: 20x20x500 linear rail - http://openbuildspartstore.com/v-slot-20x20-linear-rail/ Mini V-gantry set - http://openbuildspartstore.com/mini-v-gantry-set/ Smooth idler pulley kit - http://openbuildspartstore.com/smooth-idler-pulley-kit/ GT2 2m timing pulley, 30-tooth - http://openbuildspartstore.com/gt2-2m-timing-pulley-30-tooth/