Anet A6 Dual MOSFET Holder

thingiverse

I received my Anet A6 and ordered two MOSFETs to protect the hotbed and the hotend power, but I couldn't find a support for two MOSFETs, only single ones. After reviewing different supports made for the Anet A8, I decided to base my design on the Anet A8 MKS Mosfet mount by mkantor (http://www.thingiverse.com/thing:1950023). I modified it in Tinkercad and exported the STL file. The MOSFETs will need to be screwed in with tapping screws as there are no holes in the A6 frame to use standard screws and nuts, and the second MOSFET hangs off the back in the air. This is my first modification ever, and it's a work in progress. I'm printing it as this is being typed (Jan 3rd 2017), and I'll update this with any needed modifications and comments. As soon as it's printed, I'll post a picture of the mount, and once installed, I'll post another pic. Since it's a work in progress, and I'm a total newbie at this, please let me know if there's something wrong with the file. EDIT 1 - Jan 4th 2017: I printed the support successfully with a raft, and it came right off with no issues. The part is very nice; I'll install it to make sure it fits as it should and update here. EDIT 2 - Jan 4th 2017: The support is installed, and it fits perfectly. A new image has been loaded to show the installed support. Once my MOSFETs arrive, I'll install them and post another picture. EDIT 3 - Jan 6th 2017: I received my MOSFETs from Skynet3Dmods, and they're smaller than the ones mkantor used when he created the original design that I based mine off of. The problem is that I have zero skill in CAD, and I'm unable to modify the design to make it work with my MOSFETs. EDIT 4 - Jan 7th 2017: After finding another design that allows for separate installation above and below the board, I settled on using that design and a remix I made. You can see the details here: http://www.thingiverse.com/thing:2021689 Print Settings Printer Anet A6 Rafts Yes Supports No Resolution 0.2 Infill 15% or 20%