Anet A6 Bed Y-Axis Cable Chain Bracket

prusaprinters

Updated mount for the front mount drag chain which can be found here: https://www.thingiverse.com/thing:2345005 . The update addresses the fact that on a stock Anet A6 the hot nozzle or the fan nozzle can hit the drag chain on the original design. The gap for the bed spring was also widened slightly to accomodate for washers and suchlike. Use the chain from the original. Probably will update this with another adapter to link the chain to the frame, for now I am using a cable tie. Updated - holes for the drag chain were a bit high, adjusted. Have not tried fitting it yet, but it looks good compared to the original part. Updated 02/01/2018 - Slight geometry adjustment to add an extra fillet for more strength and because that area looks a bit sparse (probably due to the slicer), moved the holes another 1.5mm as I was not happy with the projected fit. Looks good now. Post if you have any problems or I will update later once I have time to take the bed apart and fit the thing. Updated 02/01/2018 - Adjust the cable trough to make more clearance around the hole so I can use a 4mm plastic snap rivet to fit it. Beta_1.4. Print Settings Printer: Anet A6 Rafts: NoSupports: No Resolution: 0.1Infill: 100 Category: 3D Printer Parts