Anet A3/A6/A8 Filament Guide
thingiverse
Like many others, I have come to the conclusion that printing TPU on an Anet printer is not possible without special preparations. As expected, I found solutions to my problem on Thingiverse. Once again, those solutions didn't fit my printer perfectly. And so I started designing again, based on the solutions of MasterFX, Bomber0 and Leo_N. With the offered STL files, I noted deviations to my printer in the tenth to millimeter range, which is too much deviation for such a delicate setup. I marked this thing as a remix because of the sources mentioned above, although I redesigned it from scratch. Printer settings: Material - PETG Resolution - 0.1mm Wall thickness - 1.2mm Top/Bottmom thickness - 0.8mm Infill - 100% Support - no Build Plate Adhesion - Skirt
With this file you will be able to print Anet A3/A6/A8 Filament Guide with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Anet A3/A6/A8 Filament Guide.