Anderson PowerPole Polarity Checker
cults3d
This is an Anderson PowerPole Polarity Checker to see if the power is correct or curcuit is Live. I used the following: PowerPole Shells - https://powerwerx.com/anderson-power-fingerproof-pp15-45-housings PowerPole Contacts - https://powerwerx.com/anderson-1335g1-printed-circuit-board-vertical 5mm Bi-Polar LEDS - https://bit.ly/30k4UMm 330ohm Resistor You will need to check the Polarity of the LED so that the Positive leg that gives you Green is on the Red PowerPole. Then you will cut that leg to 14mm. You cut the other leg to 4mm along as both legs of the resistor also cut to 4mm. Then solder according to pictures attached and check device, then insert in housing. Great for checking unknown power sources before plugging in expensive equipment. Also good for checking if the circuit is alive. Enjoy
With this file you will be able to print Anderson PowerPole Polarity Checker with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Anderson PowerPole Polarity Checker.