Amiibo Stands for Full Amiibo Collection
prusaprinters
<p>I printed about 250 of these on my Prusa MK3S+.</p><p> </p><p>I found the best results came from using Monoprice PLA (https://www.monoprice.com/product?p_id=15835).</p><p> </p><p>I used 0.2mm layer height on SPEED setting in PrusaSlicer. </p><p> </p><p>For all stands: 215C, 7% grid infill. </p><p>For the rods: 215C, 20% grid infill. </p><p> </p><p>The most common issue I had was the corners of the bottom shrinking slightly and pulling away from the bed, but it was typically very subtle. I think there was literally only one stand that I decided to reprint due to it.</p><p> </p><p>Overall cost of stands for every single amiibo was ~$150 of filament and it took about a month of running the printer ~20hrs per day to finish. </p><p> </p><p>For most amiibo, use the “standard” stands.</p><p>For the Skylander/Amiibos (DK and Bowser), use specifically their stands (square_skymiibo_*).</p><p>For the monster hunter amiibos (which are quite wide), use the “wide_” stands. You might want to use one for the Guardian (BOTW) as well, but I found he actually fit on a standard stand. YMMV.</p><p>For loot goblin, use his stand ("loot_goblin_*"). </p><p>For the cards, use the card stand. </p><p>For the yarn amiibos (yoshis and the pup), use the “square_hole_” stands. </p><p> </p><p>For mega yarn yoshi, you're on your own. I just left him in his box. </p>
With this file you will be able to print Amiibo Stands for Full Amiibo Collection with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Amiibo Stands for Full Amiibo Collection.