
Amazon Echo Flex Accessory Enclosure Saddle for ESP (25mm pin width)
thingiverse
Alternate saddle for jamie-jb's Amazon Echo Flex Accessory Enclosure. This is a remix from https://www.thingiverse.com/thing:4583395 The above enclosure provides a "saddle" suitable for the NodeMCU often used with ESPHome. ESPHome supports alternate boards sometimes with slightly wider pin width distances. This saddle support devices with a 25mm pin width, for example the ESP32-DevKitC V4, which was the reason for the remix. To complete the enclosure you will need all files from the original build link, just print off this saddle instead of the one provided. You'll notice that the saddle does not cover all pins, this is a non issue as the saddle is just acting as a holder for the board, and in fact given you need to solder to 5v and ground, having this pins free is probably preferable. The saddle fits my ESP32 perfectly, so perfectly there's no tension and it just drops out when inverted, this is fine, just bend the pins very slightly inwards or outwards to create some tension.
With this file you will be able to print Amazon Echo Flex Accessory Enclosure Saddle for ESP (25mm pin width) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Amazon Echo Flex Accessory Enclosure Saddle for ESP (25mm pin width).