AM8 SKR2 & RasPi & MOSFET Case

prusaprinters

This two part case can be fixed to the left side of an AM8 (https://www.thingiverse.com/thing:2263216) aluminium 2020 extrusion frame.Special care was taken to provide enough space for an USB cable which connect the SKR 2 and the RasPi. Also, the Ethernet port is easily accessible.Power and some motor wires come in from the bottom, and signal and the rest of the motor cables come out either the top or the right openings.The case fits:1* Bigtreetech SKR 2 mainboard1* Raspberry Pi2* MOSFET module (e.g. https://www.amazon.de/-/en/gp/product/B077HP7XX9)1* 40 mm cooling fan (e.g. https://noctua.at/en/nf-a4x10-flx)1* Buck voltage converter (e.g. https://www.amazon.de/-/en/gp/product/B01GJ0SC2C)1* Custom probe interface PCBNuts and bolts needed:many* M3 x ~12mm boltsmany* M3 nuts4* M3 x ~60mm bolt or threaded rod5* M5 x ~8mm bolt5* M5 2020 slot nutSome washers if you use longer boltsThe parts should fit onto a 220 mm* 220 mm build platform with a bit space left.The holes should line up pretty well, however the SKR ones might need a bit of enlargement. Print Settings Rafts: NoSupports: NoResolution: 0.2mmInfill: ≥15%Filament: Any PLANotes:Make sure your bed is level. Assembly Screw all modules and PCBs to the back frame using M3 bolts and nuts. Category: 3D Printer Parts