AM8 Board Holders Anet/Ramps/Gen1.4

thingiverse

Human: Improved the name to accurately reflect what board holders there are here. Slim and durable board holder for the AM8. Can be used with either Anet boards or Ramps 1.4 boards. To secure the board in place, M3 x 20mm screws and M3 nuts are required. Instead of filling the space between the board and mosfets completely, I opted to create a webbed design allowing wires to be easily routed through them if desired. If you need any custom files created, please feel free to comment or message me. The following files support the 50mm x 60mm mosfets (the black mosfet in the pictures): AM8_Ramps_Dual_Mosfet_Holder.stl Board_and_Duel_Mosfet_Holder.stl Board_and_Mosfet_Holder.stl AM8_Ramps_and_Mosfet_Holder.stl This holder supports larger mosfets (88x67). It features the blue board and white mosfet seen in the pictures. Board_and_Big_Mosfet.stl This holder is designed for the mosfet with fins (70x45mm). AM8_Board_and_Dual_Mosfet_70x45mm.stl V2 Variants are simpler to print and include zip tie slots for better cable management. I added a dual mosfet version. Since I don't have access to a dual mosfet, any suggestions from users who print one out would be greatly appreciated. I also added a version that supports single MKS Mosfets (the larger mosfets available). A new version was added that now supports a Ramps 1.4 board and a single mosfet. I printed a thin version, ensuring all holes align properly and creating a gap between the board and x motor to prevent interference. 10/21/2017 - Added a Ramps 1.4 board with dual mosfets. Also made some minor adjustments to one of the board holders for better fitment. 11/12/2017 - Added a description to help users choose the correct .stl files for their specific mosfet setup. 1/9/2018 - Added a new mosfet support for the original Anet Board. Please let me know if any adjustments are needed. 5/27/2018 - Added V2 Versions of the boards, making them easier to print and improving cable management with zip tie points. 5/28/2018 - Added MKS Gen 1.4 Board holders and changed the name for accuracy. 6/3/2018 - Fixed some spacing issues on the Ramps holder, ensuring holes line up better. Also lowered the studs so that users can use 18mm screws instead of 20mm. Thank you