Allen wrench holder for pegboards

prusaprinters

<p><strong>NOTE: Use of the first STL (v2.0) is recommended, more info in the update notes below</strong></p> <p>Pegboard holder for a set of 9 Allen keys / Hex wrenches / Inbus wrenches. Designed for sizes 1.5–10 mm (common Wera sets). Pegs on the back are for 25 mm vertical and 15 mm horizontal hole spacing grid (can be edited in Tinkercad using the link below). The warning note on it is just random Czech (slightly dirty) workshop humour :)</p> <p><strong>UPDATE 2:</strong> I've uploaded a new version (2.0) with a triangular block added behind the smaller wrenches to prevent them from rotating towards the back and falling out. I've also added an STL for only the block itself, which you can print and superglue to the original version to upgrade it. I'm leaving the old versions here, but version 2.0 is the go to one.</p> <p><strong>UPDATE:</strong> I've added a version with wrench size labels.</p> <p>This thing was made with Tinkercad. Edit it online <a href="https://www.tinkercad.com/things/bOROYohQT3u">https://www.tinkercad.com/things/bOROYohQT3u</a></p> <h3>Print instructions</h3><p>Should be possible to print vertically without supports thanks to the slanted base. It is quite tall, so a brim may be a good idea. The top pegs may come out a little ugly, use supports there if it's too bad (it was totally fine without supports on my MINI though). You can use the "pegboard_test_piece" to try if you need supports or not. The pre-sliced files are for MK3, but the model fits in MINI print space as well.</p> <p>If you print it, let me know in a comment how it works for you. Thanx!</p>