All In One 3D Printer test

thingiverse

Are you stuck with a problem and can't figure out how to solve it?! Make sure to check out the guide associated with this model, <b>the guide is still a work in progress (August 23, 2018), but there are some useful tweaks you should definitely know!</b>\r\nhttps://3dnation504795197.wordpress.com/guide/\r\nHere's a link for those who want to support me; it won't cost you anything, just five seconds of your time. So if you'd like to support me (without any fees), go to the guide this way! <b>Thanks</b>\r\nhttp://zipansion.com/3C9Yh\r\n\r\nHere's a newer, better, smaller and more compact 3D printer test!\r\nhttps://www.thingiverse.com/thing:2975429\r\n\r\nTake a look at the new MINI version of this 3D printer test! \r\nhttps://www.thingiverse.com/thing:2806295\r\n\r\n!UPDATE! (February 25, 2018 1:28 CZ time)\r\n- I was notified (big thanks to Craven112) about a small issue with my 3D design so I decided to fix it! The problem was "0.5mm diameter" text, which was meant to be "1.0mm diameter" text. Also, the hole test had a little mistake, the "8mm" hole was actually 9 mm in diameter. Now everything should be fixed in "3D printer test fixed (3nd gen).stl" file.\r\n\r\n- I've also changed the rotation of the model, so now it should be in the correct position :-).\r\n\r\n----------------------------------------------------------------------------------------------------------------------\r\n\r\nI decided to design an All In One 3D Printer test, and here it is. This test includes : support test, scale test, overhang test, hole test, diameter test and bridging test. Print this with 100% Infill without supports.\r\n\r\n!NOTE! : If you're using Cura and you're experiencing missing text issues, make sure to enable "use thin wall" setting! (big thanks to CoreyNach for this!)\r\n\r\nWe've just reached over 5k likes border, THANK YOU ALL!!!!\r\n\r\nIf you like my design, feel free to tip me :-)