alien abduction lamp

cults3d

This project was created after a thorough search failed to yield a satisfactory design. The design utilizes the Core brand beer glass, featuring straight tapered sides and available in either 16 oz or 22 oz sizes, both of which can be easily sourced online or by simply asking your bartender. A super bright LED light with a cool white hue (12B-CW-S) will serve as the primary illumination source. Five additional 5 mm LEDs (available in any color preference) will be strategically positioned around the saucer to create a visually appealing effect. The necessary components include: * One 12v charger/power supply with a minimum current rating of 500 ma * A small plastic farm animal for decorative purposes To assemble this project, follow these steps: 1. First, securely attach the main LED light to the bottom recess of the Core glass using a suitable adhesive. 2. Next, connect all the red wires together and black wires separately. 3. Drill a hole in the edge of the saucer and feed the power supply wires through it. 4. Connect the power supply wires to all the red and black LED wires. Be sure to identify the positive wire, which usually has a visible trace. 5. Before proceeding with assembly, test the wiring to ensure everything is functioning correctly. 6. Once satisfied with the wiring, glue the windows into position on either side of the Core glass. 7. Secure the LED light in place within the Core glass using an appropriate adhesive. 8. Place the Core glass inside one half of the saucer and assemble the saucer itself. 9. Note: To ensure a snug fit between the saucer and the glass, apply double-sided tape to the end of the glass and sand the opening at the bottom of the saucer using a small amount of sandpaper. Be cautious not to over-sand, as this may cause the glass to rest on the Core, compromising its structural integrity.