Alfawise u20 ONE brackets for PETSFANG

thingiverse

I crafted custom brackets so I could install the PETSFANG Vol2 on an Alfawise u20 ONE (it might also work on other Alfawise models, test them and let me know). PARTS REQUIRED: - Print the two included files: Base Plate and Top Plate - Print the PETFANGs from www.thingiverse.com/thing:2759439 (I used file STOCKBASE_DUALFAN_DUCT_9.20.stl) - Two 6mm long m3 screws for the base plate - Two 25mm long m3 screws to sandwich the hot end - Four 8mm long m3 screws for side brackets - Four 14mm long m3 screws for the 40mm fan - I used four 25mm long m3 screws with m3 nuts for the 5015 fans, but those aren't correct; they worked anyway - You'll need a m3 tap or self-tapping screws - One or two 5015 Fans PRINTING: - Base Plate doesn't need supports - Top Plate needs supports to print the hotend screw holes INSTALLATION: It's pretty straightforward, follow the photos. The base bracket should fit easily and clear the openings for the hotend and roller bolts. You'll need to wire the new 5015 fans; you can reuse the factory 40mm fan for the hotend.