Alfa Romeo Mito 6.5" Speaker Spacer

prusaprinters

<p>Unfortunately I forgot to take pictures of the installed spacer but, as there are so few designs available to fit this car, I thought I'd get these out there. I've included the STL as well as the STEP files for those who'd like to have a closer look or add their own touches.</p> <p>Required a speaker adaptor plate to mount 6.5 inch JVC speakers (<a href="https://nz.jvc.com/car/speakers/cs_df620/">https://nz.jvc.com/car/speakers/cs_df620/</a>) to my Alfa Romeo Mito. These spacers fit into the 3 hole pattern on the door and spaces the speakers to fit at the correct distance in the door-cards whilst avoiding the window glass.</p> <p>These fit perfectly on the rear speakers but I had to slot the three mounting holes for the front ones</p> <p>I drilled out the rivets of the old OEM speakers and put a M5x16 bolt through the holes from the inside. The bolts were tightened down with a nut before the spacer is placed on the studs. this allows a gap for the speaker wires and I sealed the rest of the gap with double sided foam tape.</p> <p>I cut the OEM plug and soldered the supplied wires to the factory wiring but there is plug adaptors available on ebay (<a href="https://www.ebay.com/p/23006803274?iid=183968440860">https://www.ebay.com/p/23006803274?iid=183968440860</a>)</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div> <p><strong>Rafts:</strong></p> <p>Doesn't Matter</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>0.2mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>10</p></div> <p><strong>Filament:</strong> 3RDAX PLA Black</p> </p></p></p> Category: Automotive