Alcatel 1X 5059A & TCL L9 case

prusaprinters

<p>Originally published here: <a href="https://www.thingiverse.com/thing:3575768">Alcatel 1X 5059A &amp; TCL L9 case by tato_713 - Thingiverse</a></p><p>This was originally designed for the smartphone of the Chinese brand TCL, model L9. Some time after that, I discovered that it is the same phone as the Alcatel 1X.<br>Some of the models are designed for rigid materials and others for flexible ones. <strong>The models materials are not interchangeable</strong>, so pay attention to the file names. If you have any request on the design just ask me.<br>This is part of an update for the 2020 Valentine's Day, in which I add for most of my phone cases a "heart" version; a model with a hole in the back side with the shape of a heart.<br>For other phone cases check <a href="https://www.prusaprinters.org/social/120859-tato_713/collections/48429">this</a>.<br>Here is the explanation of the files names:</p><ul><li><strong>Flex:</strong> made for elastic filaments like TPU. Tested on TPU.&nbsp;</li><li><strong>Rigid:</strong> made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA.</li></ul><p>I spend part of my time making these models, letting them available and free for everyone. If you want to support my work, you can contribute with me here:</p><h3>Print Settings</h3><p><strong>Rafts:</strong></p><p>Doesn't Matter</p><p><strong>Supports:</strong></p><p>Doesn't Matter</p><p><strong>Resolution:</strong></p><p>Doesn't matter</p><p><strong>Infill:</strong></p><p>Doesn't matter</p><p><strong>Notes:</strong></p><p>If you set the wall width to one filament line (0.4~0.6mm) and the infill overlap to higher amount (70~100%) you could have a rough wall surface.</p>