Akro-Mils 30230 Bin Divider

thingiverse

This is a horizontal divider for an Akro-Mils 30230 bin. The divider neatly slots into the notches along its sides - slide it down until the tabs at the top are snug inside the top notches, then continue sliding down and guide the bottom corners carefully into the notches at the bottom of the bin's sides. Print Settings Printer: FlashForge Creator Pro Rafts: No Supports: No Resolution: 0.18 Infill: 40% Notes: I just happen to have red ABS that matches my bin color quite closely. I used 4 top layers, 2 bottom layers, 4 perimeter shells, and 40% infill. The print turned out very sturdy indeed. Originally I had the top corner tabs extruded in both directions, but by flattening one side I was able to cancel supports altogether, and the divider still fits securely.