AJ SHARP knife sharpener

thingiverse

This sharpening system is meant specifically for individuals who own a Lanky Rod System, but the clamps do not accommodate knives with oddly angled bevels or spines. This sharpener can sharpen most knives, but if they are too short or aren't wide enough to fit on the platform correctly, it won't work. I am currently working on developing a more forgiving and modular system, as this one is primarily a proof of concept. iCodesmith provided a useful table clip add-on. Go like his profile here and be kind to him. https://www.thingiverse.com/iCodesmith/about BEST DIMENSIONS FOR COMPATIBLE KNIVES: At least 3/4 inch by 2 inches by 1/8 inch, or it might not fit on the platform correctly. If you can scale up the entire system to accept larger magnets, go ahead, it will be able to handle larger knives. But if you do scale up, I would bet that using the AJSHARP.stl rod guide might work fine, as it will enlarge the guide holes. For best results, sharpen gently and do not press too hard. However, have confidence in this system because it is capable of being a great sharpener. My BK-11 is now scary sharp thanks to this system, whereas before the Lanky System did not grip the spine of the knife properly, causing botched sharpening. There are 2 files attached; open AJSHARP.stl in Cura or whatever and delete the angle guide, then open the second file and add the new angle guide to the print. Do not use the AJSHARP angle guide because it is too small to accept the rods properly. I used 2 12x3mm neodymium magnets from Home Depot, pressing them into the holes at the front without glue required. To get the most out of this sharpener, lay a cloth or piece of leather down on the edge of a table and set the jig on the edge with the magnets barely hanging over the edge. Then just sharpen away, being gentle to avoid pressing too hard or too soft. You can cut an old mousepad and glue it to the bottom of the base to get a better grip on tables etc. Thanks for looking, and please leave any feedback on how I can improve this system.