Aiways U5 Hooks

thingiverse

These are two types of brackets for the Aiways U5 for the hooks in the area, where usually a glovebox is situated. You can use these brackets to screw it on a (hand-) bag or something else as a replacement for the missing glovebox. Speaking of two types, there is one type that can be screwed together with allen head screws - i would recommend M3 x 8mm with the corresponding nuts - or with countersunk head screws that you usually use for wooden parts - I would recommend 2.5x12mm. Advantage of the countersunk screws is, that you do not need to prepare the bag, just screw the screws through the material. If you use the allen head screws, you need to make 8 holes in the bag, before you are able to screw in the screws. But it looks a little bit better. The cap is for protection of the stuff stored inside the bag from the screws. This should be glued in with a tiny bit of hot glue. If you print it with TPU, nothing else is going to stick properly.