Airtripper mountadapter plate for MakiBeast

youmagine

Mount the Airtripper using stock drive mount holes that feature 4 holes for 4mm screws and 2 holes for 6mm screws. Mounting it onto a plate requires some modification to the SCAD file, which can be done as needed. Please note that a small top cover opening is required or you can leave the top cover like I did. To mount the Airtripper, you have two options: Option 1: Use 3 x 4mm screws, including two of the stock holes and an additional hole in the lower left corner. Option 2: Use 4 x 4mm screws with washers between the Airtripper and the mount plate. This will lift the stepper slightly, creating room for the fourth screw head which is covered by the stepper. Related links: * Airtripper extruder: http://www.thingiverse.com/thing:126778 * Airtipper mod for rubber printing: http://www.thingiverse.com/thing:271334 * Airtripper mounted outside of the MB: https://www.youmagine.com/designs/airtripper-bsp-for-makibox-quick-release * Mod for E3D pneumatic fittings: http://www.thingiverse.com/thing:343148