airsoft spring shotgun bullpup kit
thingiverse
The kit is built around a cm.355m spring shotgun from Cyma. I am still experimenting and testing the different parts. I try to make as many updates as possible in the meantime. A lot of filing and modifying has been done. ---------------------------------------------- 15/03/2020 at 10:30 A front grip mount was added without a grip so you can add your own grip or picatinny rail. 16/03/2020 at 8:25 Files and photos about the replacement trigger and mag release mount/trigger mount were added. 19/03/2020 at 16:18 The trigger mount v4 was added because v3 looks a bit blocky on its sides. V4 has also been reinforced a tiny bit in the back. Part settings are being updated a little bit. Prototyping and fitting is almost done! Expect new information soon! 21/03/2020 at 10:12 Prototyping is almost finished, and it might be redesigned with the new trigger. A photo was added. 26/03/2020 at 9:14 The rest of the parts were added, but they are v1 and not that good yet. Updates to these parts will be added soon! 2/04/2020 at 12:38 M4 (Mark 4) parts were added: these are the best parts so far. 2/06/2020 at 13:20 The project is being rethought, and new parts are being worked on (coming in the future). 3/06/2020 at 11:15 and 17:55 M3 parts were added (front grip with picatinny rail, new trigger Mark 3, and a new grip with AEG M4 grip attachment). The screws needed are four times m3x8 with .5 pitch, friction fit. At 17:55 A grippart M5 was added for actual real firearm grips. They need an m6x27mm bolt and an m6 nut.
With this file you will be able to print airsoft spring shotgun bullpup kit with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on airsoft spring shotgun bullpup kit.