Airsoft KWA 1911 Mk I adjustable sight

thingiverse

Adjustable sight for Airsoft KWA 1911 Mk I. I only have the MkI but I suspect this will work on all versions of the KWA 1911. Extra parts needed: * M3 nut * M2 nut * M2 screw 5-10mm (will need to cut to size) Make sure the head is an Allen head! * super-glue Make sure you view online videos on how to disassemble your slide and take off the existing sight. Hint: The allen screw you see in your existing sight is a lie :) There is a screw underneath the sight and inside the slide that has to be removed first, then you have to remove the part the screw screwed into (don't know what it's called...), and only then can you safely remove the existing sight. Assembly: 1. Print out the base and insert the M3 nut in the bottom. 1. Install on your slide and re-assemble everything underneath the new sight. * The screw you unscrewed earlier will catch onto the the M3 nut you installed. 1. Install the M2 nut on top of the base 1. Screen the M2 screw into the nut. * You will likely have to cut or file the M2 screw down to size so that it can be screwed in flush with the nut without the shaft touching the slide. 1. Apply a very small amount of superglue *only* to the forward edge of the base and place the top of the sight on top of the base you installed in step 1 above. * In the attached pictures, the superglue tube points to the edge that needs to be glued together. * The top of the sight needs to be able to flex, so don't glue it fully to the base. After assembly, adjustment happens by inserting an Allen wrench in the hole in the top of the sight to turn the screw that is now buried inside the sight. Unscrewing the screw will cause the top portion of the sight to flex and move upwards also making the pellets arc higher.