Airsoft G36 stanag adaptor

cults3d

The most advanced magwell ever printed to date (27.06.2019) and still given the update. The update made it more print-friendly and improved overall function and ease of assembly. To be frank, this is a replica of SPUHR magazine adapter. It operates in the same way and looks as close as possible for airsoft. Both buttons for index fingers are functional. Originally designed for Umarex G36, it should work with everyone, but if not, the feed tower is a separate part that can be swapped out. We will need 2 M3 x 30 tapered bolts, some 2.4mm diameter nails, and 1-2 4.5mm diameter coil springs. Printing and assembling this magwell is somewhat challenging. Ideally, you want to use ABS and acetone to glue it together, not just to smooth it out. The parts are keyed, and there's my lazy explosion scheme to give you an idea. Do NOT glue the feed tower (the blue part on renderings). It requires 2 M3 x 30 tapered bolts; nuts are optional. So when the four main parts are printed, assemble them onto your G36. Take a syringe and fill it with acetone. Carefully fill the gaps, being wary that your gun is likely made from the same polymer and don't glue it to the adapter permanently. Leave it on the gun until it dries. Alternatively, you can use a light mix of ABS juice. The rest is assembled using nails cut to pieces (2.4mm diameter). For the magazine catch, you will need 2 springs plus or minus 4.5mm. I found them in a heatsink from an old PC motherboard. If you have trouble finding exact springs, contact me; the model can be customized to have up to 7mm diameter springs. And finally, the feed tower. Ideally, print it in a different color. You need solvent 646 or just dilute some acetone. A really tiny amount will do. Take an ear stick, rinse it in, and rub the inside of the feed tower until smooth. Done! Assemble and enjoy. P.S. Magazines may vary pretty wildly. If you have problems with catch or fitment, contact me; I'll adjust the model for you.