Airsoft BB bottle dispenser cap

thingiverse

Thread-on bottle cap for plastic bottles of airsoft BB's or other similar items. Tested and used on a 5000 count bottle of .25 Elite Force bio bb's, intended for use with wide openings on Lonex and similar hi-cap mags. Step and Solidworks (2017) files included. The source file for the cap is located at: https://grabcad.com/library/plastic-cap-28mm-for-1816-thread-finish-1 Print Settings: Printer Brand: Printrbot Printer: Simple Black Rafts: No Supports: No Notes: Printed with Cura 15.04.6 on a Printrbot Simple Black. Additional items: fan nozzle and Buildtak (highly recommended over tapes). Quality: Layer height: .2mm Shell thickness: .8 Retraction: enabled Fill: Bottom/top thickness: 1mm Fill density: 25% Speed/temp: Print speed: 40 mm/s Print temp: 210 C Support: Type: None Platform adhesion: Brim (10 lines) Filament: Diameter: 1.75mm Flow: 100% Machine: Nozzle size: .4mm Retraction: Speed: 60mm/s Distance: 4mm Quality: Initial layer thickness: .3mm Initial layer line width: 100% Cut off object bottom: 0mm Dual extrusion overlap: .15mm (not applicable in this case) Speed: Travel speed: 70mm/s Bottom layer speed: 20mm/s Infill speed: 40mm/s Top/bottom speed: 0mm/s Outer shell speed: 40mm/s Inner shell speed: 40mm/s Cool: Minimal layer time: 5sec Enable cooling fan: enabled Fan full on at height: .6mm Fan speed min: 100% Fan speed max: 100% Minimum speed: 10mm/s Cool head lift: not enabled.