Airsoft 40mm grenade tripwire mine. Mine with tripwire for airsoft

cults3d

Tired of crappy spring-loaded claymores, I designed this tripwire mine compatible with any 40mm grenade. I recommend not loading the grenade with bbs, as the noise alone is more than enough. Screwing the barrel part, not being the full thread on the case part, has its trick, but you can reload the grenade without removing it from the barrel. I have attached 2 barrels one with the correct measurements and another one a little wider, with the first one in my printer (probably due to a bad calibration, I had to sand the internal part a little, with the wide barrel, it fits without problem. For the pins and cocking bar, I used 4mm steel rod and cut the parts with a dremmel without much trouble. In addition to the printed parts, it is necessary to: 2 pieces of 17.5mm steel rod Ø4mm 1 piece of 125mm (approx.) Ø4mm steel rod 2 springs 45mm 4 screws 19.5mm 1 hairpin Assembly is very simple, and with the cap, the parts are perfectly secured. https://youtu.be/I2hpQp6ewdA Tired of crappy spring-loaded claymores, I've designed this tripwire mine compatible with any 40mm grenade. I recommend not to load the grenade with bbs, since only with the noise it makes, it is more than enough. Screwing the part of the barrel, since it is not the complete thread in the part of the box, is a bit trick, but you can reload the grenade without removing it from the barrel. I have attached 2 barrels, one with the correct measurements and the other a bit wider, with the first one, in my printer (surely due to a bad calibration, I had to sand the inside a bit, with the wide barrel, it fits without problem. For the pins and the hammer bar, I used 4mm steel rod and cut the pieces with a dremmel with no problem. In addition to the printed parts, it is necessary: 2 pieces of 17.5mm Ø4mm steel rod 1 piece of 125mm (approx) Ø4mm steel rod 2 45mm springs 4 19.5mm screws 1 hairpin The assembly is very simple, and with the lid, the pieces are perfectly secured. https://youtu.be/I2hpQp6ewdA