Airgun silencer REVOLUTION 177 3D print model

cgtrader

NEW REVOLUTIONARY DESIGN FOR SHOOTERS IN 2020! We're thrilled to unveil our revolutionary new silencer, the "Revolution", boasting unparalleled noise reduction capabilities. The advanced baffles redirect an impressive amount of air, resulting in a significantly higher ratio of baffle effectiveness to total silencer volume. This premium model features an extended length of 250 millimeters and a diameter of 40 millimeters, perfect for backyard shooters who crave maximum range without disturbing neighbors. Designed for caliber .177" / 4.5 mm. The Revolution silencer is available in the following calibers: * .177" / 4.5 mm * .22" / 5.5 mm * .25" / 6.35 mm * .30" / 7.62 mm Crafted with precision and durability, our fully functional silencers boast superior sound moderating characteristics and exceptional accuracy. We've made significant improvements to ensure top-notch performance: * Our new 1/2 UNF thread design simplifies installation by allowing direct screwing onto the barrel after a quick cleaning with a plug tap; simply screw on and off five times for an airtight seal. * The inner hole features a precisely cone-shaped trajectory, eliminating impact concerns while maintaining tight tolerances. * A clear label at the front of the barrel clearly indicates the intended caliber. For effortless finishing touches: * Use a layer height of 0.1 – 0.15 mm for best results when 3D printing our silencer. * Set your print speed to a maximum of 40 mm/sec for reduced vibrations. * Suitable printing materials include PLA tough or regular PLA. * Ensure the threads are facing upwards and follow the instructions provided, as shown in the picture. * Avoid using supports, as the baffles' 45-degree angle is well within printable limits; if you encounter build plate adhesion issues, try printing with a raft or brim instead. 3D printing time estimates around 25 hours when set at 0.15 mm layer height and 40 mm/sec. Constructed by experienced Swedish machine engineers.